Hard disks, solid state drives

HDD, SSDForum → Raid Controller STLab A-341 - Flashing FirmWare

Raid Controller STLab A-341 - Flashing FirmWare

Pages: 1
23.08.2007 10:14:00
Acquired a controller at the beginning of glad that it flush memory but it turned out that the software does not understand
SST39VF010. The current revision of the BIOS 7. 4. 0. 1 but would like to sew a more recent.

Appearance ~ 450K.
http: // werwolf3d3. narod. ru / IXBT / sata / top1. jpg
http: // werwolf3d3. narod. ru / IXBT / sata / top2. jpg
http: // werwolf3d3. narod. ru / IXBT / sata / bottom. jpg

http: // www. siliconimage. com / support / supportsearchres ... = 2 & amp; osid = 0 & amp; ;
SiFlashTool - can not identify the flush so strangely does not even talk about the error.
UpdFlash - offers to choose from the list because it too can not be identified.

question is someone able to flash the controller is not vypaivaya flush?
23.08.2007 10:15:00

what?
23.08.2007 10:17:00
Here too I think, "and that"?

PS. p. p. 4. 2. 8
23.08.2007 10:37:00

Are you sure that there is EEPROM?

Again, not a word about that - why is sewn?
23.08.2007 11:08:00

what?

Glitches

Like reprogrammable
http: // www. datasheetcatalog. com / datasheets_pdf / S / S / T ... / SST39VF010. shtml

Why do you reprogram motherboard, video card various other devices?
new revision is 7. 4. 0. 5 for such devices, I prefer to was the latest firmware as actually and driver.
23.08.2007 11:32:00

Why do you reprogram motherboard, video card various other devices?

Usually from grain you


new revision has the number 7. 4. 0. 5 for such devices, I prefer to was the latest firmware as actually and driver.

Something tells me that following your post will be something like: "... Ahh help - please STLab A-341, and it is now not working - how to return everything back?"
you violate the first rule repairman - do not fix that, and so works
23.08.2007 11:56:00
Well, what about nefig agree, but then issued a new version of the same

Well, how much longer I throw nafig or rather find where unsolder and solder the socket, but sew up the chip will be more difficult problem.
general could move to successive flushes, desoldering and their programming is easiest to 8 feet

Generally what can be considered an identifier flushes, but it may brothers that do not dopayat although this information must be issued in the normal exchange.
24.08.2007 9:14:00
I added pictures if you are interested.
23.12.2008 14:26:00
people plz help with this controller, I need to reflash the firmware in it, after turning off the light controller is no longer seen in the BIOS, even though the controller itself bios I can come in and Windows sees it, I expect that flew firmware, what and how do I alter it?
23.12.2008 15:15:00

can try pokoldovat (zalomat Dosov flasher). To do this I need to be sure deytashit SST39VF010 deytashity and even a flash that supports guaranteed flasher (2. 3 types). I do not promise + takes time to rework. And we feel for you - I do not have such a controller (Given ).

on SST39VF010 - already downloaded, study. Let others.
23.12.2008 20:49:00
no problem if you do not turn out okay, thank you very much for your help, if you have any questions please write to ICQ 124440109
29.12.2008 16:15:00

software does not understand SST39VF010 - in flasher 4th item indicates SST39SF. . . . Compatible. He looked at the datasheets SF & amp; LF / VF - c 5 volts switched to 3. 3 little changed timing and identification code of another. Other (write command, erasing identification) remained unchanged. Glanced proshivalschika code - is also visible support LF / VF. Should these chips sewn.
Pages: 1
HDD, SSDForum → Raid Controller STLab A-341 - Flashing FirmWare

Raid Controller STLab A-341 - Flashing FirmWare

info@www.hdd-and-ssd.com