Hard disks, solid state drives

HDD, SSDForum → UDMA5

UDMA5

Pages: 1
10.01.2002 11:16:00
I had a screw Seagate Barracuda (I). I had the dough SiSoft Sandroy, gave 17,000 points
dough I had a neighbor who Barracuda III - he has 26,000 points and the same my
17,000 I bought new - Barracuda IV, and Sandra gives the same 17,000 points. E. Slower third barracuda.
Thought I - motherboard does not pull. But I have a Gigabyte 7ZM - on the KT133 - quite modern was a year ago - UDMA100 does not hold, and UDMA66 - normal - chtozhe it, because it does not hold UDMA100 screw so badly hampered?
10.01.2002 14:20:00
due to the fact that the screw does not hold UDMA100 so much hampered?
What do you think
What other's mother?
10.01.2002 14:31:00

And this is you in vain! Indeed should not byttak

IMHO, as always proglyuchivaet Sandra. Anything other tests have not tried?
10.01.2002 14:33:00
he Soltek some on the KT133A, there UDMA100 supported
I looked speed DiskSpeed-th - I have a new 4th barracuda speed is the same as the old 1st, MB / s (to create a new file, read, write, etc)
except that noise is less
But, seemingly, can not be very different rate of 66 and 100 - even 66Mb / s not really achieved
10.01.2002 19:03:00
BARRAKUDA4 NORMALLY rabotoet only UDMA100,
the rest buggy! !
11.01.2002 0:26:00
I agree about the Barracuda (and all Segeytov) with, it strongly depends on the ATA100!

Sandra course nekudyshnaya test, try the WinBench, and better Come here http: // www. *******. ru / articles. shtml? hdd / 543 and then compare tests UDMA66, with her. you are not a bad mother, should all be ok, well, put the latest VIA 4in1. . .
And Yeshe, you can have your neighbor screw on UDMA66 drove? I forgot rearranged and all that, but it is strange somehow. . .

11.01.2002 0:51:00
and that the site is - covered with asterisks address?

via 4in1 I 37v (a)
a neighbor, I drove my old barracuda-1, it is itself UDMA66 itself, rather than 100, and it probably 17,000 points - normally
try the neighbor-as put a new barracuda-4

mean, after all, wants barracuda exactly its optimal DMA mode. . on the loop 40zhilnom that UDMA33 both barracuda give Sandra to 10000 points (the same at 10,000 points 80zhilnom Chlef but the mother that does not support UDMA66)

11.01.2002 2:21:00
so what's the Problem? , take the fish and to the neighbor if he shows fine (which I do not doubt), it means that all the beam
PS: in the link instead of stars substitute Latin letters ftsentr (IMHO the best reviews screws), type them something to iksbt not probably divided , hope for this observation are not snatched
11.01.2002 9:17:00
thanks for the link looked at the review
the neighbor now 600 km away from me because I go to another neighbor together Compare with IBM 20Gb 7200


Adding on 11.01.2002 20: 21:

potestit I the barracuda-4 vinbenchem99 several times, the results were similar (slightly different)
compared with the results of ftsentra:
Seagate Barracuda ATA IV results in WB W2K FAT32 & lt; - I, too, w2k FAT32

------------------------ U100 U66 U33 ---------------- my, U66
Business Disk WinMark 99 12300 12225 8398 7850 ----------------
High-End Disk WinMark 99 28125 27875 21175 ------------ ---- 26400
HE: AVS / Express 3. 4 33325 29875 23250 20500 ----------------
HE: FrontPage 98 111500 108750 98 350 -------- (!) -------- 150000
HE: MicroStation SE 46925 46525 37125 32300 ----------------
HE: photoshop 4. 0 11375 11400 8578-- -------------- 9870
HE: premiere 4. 2 25475 26350 18475 33400 ----------------
HE (!!): Sound 4. Forge 0 35500 36525 25225 51500 ----------------
HE (!!): Visual C ++ 5. 0 30350 29850 25100 ----------- ----- 36200 (!!)

fun ftsentrovskih very different from some places and a half times less, in some places more than
how to understand it?

12.01.2002 2:22:00
quote:
:
BARRAKUDA4 NORMALLY rabotoet only UDMA100,
the rest buggy! !

Really? And it "buggy"? I doubt that you ever worked with this screw.
I have for some time he stood on the ATA66, until I moved to ATA100. The speed difference is so small that it is placed in a test error.
In fact, this screw is slow with ATA33 and below: [url] http: // www. zhele zki. ru / index. php? op = ata4 [/ url]
12.01.2002 21:07:00
Differences
case Comptroller hand, not all of the same modes in uperaetsya UDMA!
12.01.2002 21:43:00
so the controller of the curve? mother's not so bad

okay. . Play around as will the ability to screw the neighbor

results of HD Tach 2. 61
Results Seagate Barracuda ATA IV in HDTach.
-------------------- U100 U66 U33 -------- my screw, U66
Access time ------ 13 5 13, May 13, 6 --------- 15. 4
Read Burst ----- 68817 50361 26206 ---- 34. 5Mb / s
Read Max ------ 43255 40510 24988 - --- 31866
Read Min ------- ----- 18266 17817 13337 6448
Read Average- 36671 30174 17909 23039 -----
Write Max ------ 21072 20742 15810
Write Min ------- 13746 13008 11879 // write not a test because he needs a screw bezpartitiony
Write Average- 17812 17742 14081
CPU Utilization --- 4, 6 - 4, 1 --- 2 1 - ------- 9. 8%

again very low results

it's the controller?

13.01.2002 0:44:00
I think yes. . .
potestit But on the other mother would not stop-
Pages: 1
HDD, SSDForum → UDMA5

UDMA5

info@www.hdd-and-ssd.com